The video and table below clearly demonstrate that PCIe NVMe connected SSD’s run much faster than do conventional SATA connected SSDs or SATA spinning disks.

This benchmarking was completed using a Dell Latitude 5490 laptop with Novabench free benchmarking tool.  For comparison, we also included some benchmarks we completed last year on a nicely configured Dell Optiplex 5050 and a Dell Latitude 5480 (the 5490’s predecessor).

We explain that although the 5490 has a 2242 M.2 slot like the 5480, it is a PCIe slot and not a SATA slot (like the 5480).  This means you can install an M.2 SSD into that slot but unlike the 5480, the 5490 can not use that as a  Caching SSD.

Benchmark Laptop Lat 5490 Disks - June 2018

Categories: Business & Tech News

5 Comments

Cyndie · March 25, 2023 at 12:57 am

I don’t know how you managed to get that WWAN to read the drive. I had installed a M.2 SATA SSD B+M Key on it and BIOS didn’t see it. System Configuration/Drives in BIOS only have SATA-2 and PCIE-0 checkbox, different from some same 5490 with 4 boxes if that hint at something.

Mike · November 1, 2019 at 4:05 am

Hi ian, the wwan connection can get only nvme ssd or sata too?
Can you boot the os from the wwan m.2 module ?

    Ian Matthews · November 14, 2019 at 9:13 pm

    We did, so yes, it can be done. Unfortunately I no longer have access to any of these units so what we have written is what we know.

    Thanks for checking in Mike.

Jefferson · June 24, 2019 at 6:18 pm

so using the wwan connection, I can not get a bootable m2 like hd?

that is, I choose between a conventional hd or a ssd instead of it.

    Ian Matthews · June 30, 2019 at 12:19 pm

    Hi Jeffer;

    I am unsure what you are seeing problems with. If you can provide a bit more information, we may be able to help.

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *