1. Avatar
    Winner November 12, 2017 at 8:57 pm

    Simply press ctrl+alt+delete.
    You login screen will appear immediately.

    I hope this helps

  2. Avatar
    Dina February 12, 2017 at 2:15 pm

    Can’t get any of these to work. In C, Starup Settings isn’t even an option for me. All others bring up a message saying “this option is not supported on the operating system you’ve selected”.

    • Ian Matthews
      Ian Matthews February 15, 2017 at 5:03 pm

      This sounds like you are booting from a different operating system than the one that is installed on your PC. For example, if you boot from a Windows 7 DVD on a machine with Windows 10 on the drive, this would be the type of error I would expect

  3. Avatar
    Linda November 14, 2016 at 7:05 am

    Thank you. Solution 1 worked!

  4. Avatar
    Thomas November 4, 2016 at 4:45 am

    What’s this “CNTL”-key you’re speaking of?

    • Ian Matthews
      Ian Matthews November 5, 2016 at 11:21 am

      Hi Thomas. CNTL = CONTROL = CTL on the bottom left of your keyboard.

  5. Avatar
    Rob October 25, 2016 at 8:58 am

    Simple solution #2
    Restart and press F12 to get the Boot Device Menu
    Select POST behavior
    Select Fast Boot and set to [OFF] status
    Save and exit

    With Fast Boot off, additional steps are
    taken to resolve compatibility issues.

    After rebooting a couple of times with
    Fast Boot [OFF] you can repeat the steps
    to turn Fast Boot back [ON].

Leave a Reply to Rob Cancel reply